Pericardial abscess: The corollary of disseminated Methicillin-resistant Staphylococcus aureus following diabetic foot ulcer infection

@#Methicillin-resistant Staphylococcus aureus (MRSA) purulent pericarditis, characterised by frank pus collection or microscopic pyogenic effusion in the pericardium represents the most serious form of pericardial infection. The route of MRSA acquisition in pericardial abscess commonly occurs via the blood stream infection and it is more commonly observed among immunocompromised individuals. To date, diabetic foot ulcer infection rarely disseminates and becomes a nidus for pericardial infection. Herein, we report an unusual case of MRSA pericardial abscess in a 44-year-old man who presented at Hospital Seri Manjung, Malaysia with cardiac tamponade. Past medical history indicated that he was recently treated for infected diabetic foot ulcer with MRSA bacteraemia one week earlier. Despite adequate pericardial drainage and extended parenteral vancomycin therapy, this case ended in fatality on day 42 of admission due to nosocomial infection. It is hoped that this report serves to increase the vigilance among clinicians that diabetic foot ulcer infections have the potential to progress to pericardial abscess in the presence of MRSA bacteraemia, although they may appear seemingly innocuous at presentation. Systemic vancomycin must be instituted promptly when MRSA bacteraemia is confirmed in order to circumvent the propagation of MRSA.

Silent microaspirations: The forerunner to the diagnosis of bulbar onset myasthenia gravis in a young woman

@#Recurrent pneumonia warrants a diligent work-up to identify the underlying cause that perpetuates the disease process. Insidious bulbar dysfunction is arguably the most devastating as it would be diagnosed late after significant pulmonary complications due to chronic micro-aspiration. Bulbar disorder should be considered as the potential aetiology of recurrent pulmonary infections in the young population after excluding immunodeficiency disorder and respiratory anatomical anomaly. This report illustrates a rare case of bulbar onset myasthenia gravis which manifested as focal bronchiolectasis due to recurrent undiagnosed aspiration pneumonia three years earlier. Absence of hallmark features of Myasthenia Gravis (MG) such as ptosis, opthalmoplegia and proximal muscle weakness contributed to the diagnostic delay and challenges in this case. The diagnosis was established with the collaboration of multidisciplinary teams. Subsequent correct therapeutic interventions resulted in remarkable recovery in functional status and prevented her from further aspiration in the long run.

Pre-existing chronic medical illnesses and follow up status among active pulmonary tuberculosis cases in a district population

@#Introduction: The knowledge of pre-existing medical illnesses and their follow up status among active pulmonary tuberculosis (PTB) subjects can help in tuberculosis (TB) control programme. The aims of our study were to examine: the prevalence of pre-existing chronic medical illnesses, the follow up status of known pre-existing co-morbid and to distinguish between diagnosed and undiagnosed preexisting tuberculosis related chronic medical illnesses among our active PTB subjects. Methods: We conducted a retrospective review of demographic and clinical data of active PTB subjects that were diagnosed between January 2015 and June 2017 in the district of Manjung, Perak, Malaysia. Among the 302 TB clinical notes reviewed, 253 patients were included. Subjects below the age of 18 years and whose follow up centres for their medical illnesses that were located outside of Manjung were excluded. Demographic and clinical data were collected using pre-tested data collection form by trained investigators. The data was analysed using SPSS Version 20.0. Results: We identified diabetes mellitus as the most prevalent pre-existing co-morbid (77 cases) and almost 90% (68 cases) of these diabetic subjects were diagnosed prior to active PTB diagnosis. This was followed by Human Immunodeficiency Virus and Hepatitis C infection which accounted for 12.0% (30 cases) of the study populations. Among 132 subjects who had pre-existing chronic medical illnesses, only 74 subjects (29%) were under regular follow up at healthcare facilities in Manjung prior to PTB diagnosis. Conclusion: Overall, our research provides evidence on the existence of wide variation of clinical background among active PTB subjects.

3D printed navigation template assists pedicle lag-screw placement for atypical Hangman's fracture / 中华创伤骨科杂志

Objectives To evaluate the 3D printed navigation template used to assist axis pedicle lag-screw placement in the treatment of atypical Hangman's fracture(AHF).Methods From May 2015 to January 2017,12 patients with AHF were treated at Department of Orthopedics,The Fourth Peopled Hospital of Zigong.In their operation,the axis pedicle lag-screw placement was assisted by a 3D printed navigation template.They were 8 men and 4 women,aged from 27 to 53 years(average,45.6 years).There were 7 cases of type Ⅰ,4 cases type Ⅱ and one case of type HA according to the Levine-Edwards classification.There were 2 cases of grade D and 12 cases of grade E according to the assessment of America Spinal Injury Association(ASIA).Their preoperative and postoperative neck pain was evaluated by visual analogue scale(VAS);their preoperative and postoperative ranges of cervical motion were recorded and compared.To evaluate the postoperative safety of screws,the insertion point,position within the pedicle,axial angle and sagittal angle of the screws and maximum fracture displacement were compared between actual operation and simulative operation.Results A total of 12 guide plates were designed and printed;a total of 24 lag-screws were placed.All patients underwent surgery uneventfully.They were followed up for 12 to 20 months,with an average of 14.7 months.Two patients with ASIA grade D recovered to ASIA grade E at the last follow-up.All patients showed a significant improvement in neck pain.Their VAS score at 5 days after surgery(5.86±2.02) was significantly lower than their preoperative score(8.29±1.88)(P<0.05) and their VAS score at the last follow-up(1.73±0.87) was also significantly lower than that at 5 days after surgery(P<0.05).Their range of cervical motion at 6 months after surgery was significantly larger than that at 3 months after surgery(P<0.05);their range of cervical motion returned to normal roughly at the last follow-up,showing no significant difference from that at 6 months(P>0.05).Their postoperative X-ray and CT images showed that the dislocation was all corrected.The last follow-up showed no obvious vertebral instability,screw breakage or loosening.Postoperative CT showed that the 24 screws had been located completely in the pedicle(grade 0),indicating that the screw placement was 100% accurate.The postoperative deviation at insertion point(0.70±0.78 mm),deviation within the pedicle(1.3±0.82 mm),axial angle(8.26°±0.88°) and sagittal angle(22.62°±0.86°) of the screws showed no significant differences from the preoperative simulative data(P>0.05).There was a significant difference in the maximum fracture displacement between the preoperative data(3.94±0.38 mm) and the postoperative data(2.21±0.39 mm)(P<0.05).Conclusion The 3D printed navigation template can be used to better assist axis pedicle lag-screw placement in the treatment of AHF,because it ensures safe screw placement,leading to good reduction and fixation and precise match with the preoperative plan.

Bone cement distribution form and diffusion degree after percutaneous vertebroplasty: an analysis based on Mimics software and its clinical significance / 中国组织工程研究

BACKGROUND: It has been found that the distribution and diffusion degree of bone cement are the main factors influencing the clinical effect of percutaneous vertebroplasty. OBJECTIVE: To explore the feasibility of analyzing bone cement distribution form and diffusion degree based on Mimics software, and to evaluate the relationship of clinical efficacy with bone cement distribution form and diffusion degree. METHODS: A total of 170 cases of osteoporotic vertebral compression fracture admitted to Zigong No. 4 People's Hospital from January 2017 to March 2018 were included, including 41 cases of males and 129 cases of females aged 60-97 years. All of them were treated with percutaneous vertebroplasty. X-ray and CT examination were done at postoperative 2 days, and the bone cement distribution was classified into five types based on the distribution of bone cement in X-ray images, including type Ⅰ (most cement continuously and evenly distributed in the vertebral body), type Ⅱ (most cement distributed in the central vertebral bodies), type Ⅲ (most cement distributed on both sides of vertebral body), type Ⅳ (most cement distribution at the side of the vertebral bodies and the central), type Ⅴ (most cement distribution at the side of the vertebral body). Mimics project files were created based on CT image data to calculate bone cement volume and diffusion volume. After 6 months of follow-up, visual analogue scale score, Oswestry disability index and Cobb angle were compared among groups to analyze the relationship between bone cement distribution, bone cement diffusion volume, bone cement diffusion volume ratio and clinical efficacy. RESULTS AND CONCLUSION: (1) The visual analogue scale score and Oswestry disability index of the five types of bone cements were significantly improved at 2 days and 6 months after surgery compared with preoperative data (P < 0.05), the Cobb angle of the type Ⅰ group was significantly improved compared with preoperative data (P < 0.05), and the Cobb angles of the type Ⅱ-Ⅴ groups showed no difference from the preoperative data (P> 0.05). (2) The diffusion volume of bone cement was (6.69±1.19) mL, and the diffusion volume ratio of bone cement was (20.93±3.13) ％. There was no correlation between the volume of bone cement injection and the visual analogue scale score, Oswestry disability index and Cobb angle at 2 days and 6 months after surgery. There was a negative correlation between the bone cement dispersion volume and the visual analogue scale score at 6 months after surgery, and the Oswestry disability index score at 2 days and 6 months after surgery (P < 0.05), but the correlation was weak. The diffusion volume ratio of bone cement was negatively correlated with the visual analogue scale score and Oswestry disability index score at 2 days and 6 months after surgery (P < 0.05), showing a strong correlation. These findings show that, based on the three-dimensional reconstruction function of Mimics software, the diffusion volume and diffusion volume ratio of bone cement can be accurately calculated. The bone cement evenly distributed can alleviate the local kyphosis. The diffusion volume ratio of bone cement is positively correlated with clinical efficacy, which is more valuable than the volume of bone cement.

Measurement of vertebral "shell" volume after thoracolumbar fracture reductions / 中国组织工程研究

BACKGROUND: Posterior screw rod system reduction and internal fixation is often used to treat thoracolumbar fractures (T11-L2). However, the "shell" phenomenon is focused on imaging findings and lacks of in-depth clinical research. OBJECTIVE: To explore the new method of "shell" volume measurement of vertebral body after thoracolumbar fractures reduction, and to evaluate the effect of different "shell" sizes on clinical treatment. METHODS: From January 2013 to December 2015, 72 patients with thoracolumbar fractures were treated in the No. 4 People's Hospital of Zigong City retrospectively. The patients with vertebral "shell" were retrospectively analyzed. Clinical and imaging data (X ray, CT and MRI) were collected. Compression degree of anterior border of the vertebral body, Cobb angle, Visual Analogue Scale score and reduction-related complication were recorded and analyzed. The volumes of vertebral "shell" and the injured vertebral body were measured by Mimics software. The volume ratio of shell/injured vertebral body was calculated. The healing of vertebral "shell" was followed up and observed. RESULTS AND CONCLUSION: (1) Among the 72 patients, there were 16 cases with a shell/injured vertebral volume ratio of < 5% (group A), 30 cases with the volume ratio of 5%-10% (group B), and 26 cases with volume ratio of > 10% (group C). (2) The "shell" healing: The "shell"nonunion rate was significantly lower in the groups A and B than in the group C (P < 0.05); and significant differences were not determined between groups A and B (P > 0.05). (3) Compression degree of the anterior border of the injured vertebral body: No significant difference was found in groups A, B and C before and right after reduction (P > 0.05). The compression was significantly higher in the groups A and B than in group C at final follow-up (P < 0.05). (4) Cobb angle was not significantly different in groups A, B and C before and right after reduction and during final follow-up (P > 0.05). (5) Visual Analogue Scale score was not significantly different between groups A and B and group C right after reduction (P > 0.05). The Visual Analogue Scale score was significantly better in the groups A and B than in the group C (P < 0.05). (6) Occurrence of complications: In the group A, one case affected incision exudate. In the group B, one case experienced incision infection and one case suffered from screw loosening. In the group C, two cases affected screw loosening, and one case experienced unilateral connecting rod fracture. No significant difference in complications was detected among groups A, B and C (P > 0.05). (7) Results indicate that the "shell"nonunion rate was high when vertebral shell/injured vertebral body volume ratio > 10%; loss of posterior vertebral height and chronic lumbago and back pain easily appeared. The measurement of the volume of vertebral "shell" plays an important role in clinical prognosis and treatment options of thoracolumbar judgment.

Treatment of unstable pelvic fractures with sacroiliac screwing assisted by 3D printing technique in combination with front ring nail-rod system / 中华创伤骨科杂志

Objective To explore the clinical efficacy of 3D printing technique in assisting sacroiliac screwing in combination with front ring nail-rod system for treatment of unstable pelvic fractures.Methods From July 2015 to June 2017,3D printing technique was used to assist the sacroiliac screwing in combination with front ring nail-rod system for 16 patients with unstable pelvic fracture at Orthopaedic Center,The Fourth People's Hospital of Zigong.They were 9 males and 7 females,aged from 19 to 60 years (average,39.8 years).By the Tile classification,5 cases were type B1,6 type B2,3 type B3 and 2 type C.Their operation duration,bleeding,fluoroscopy frequency,incision length,postoperative fracture reduction,success rate of sacroiliac screwing,accuracy of sacroiliac screwing,perioperative complications,weight-bearing exercise time,fracture healing time and the Majeed scores at the last follow-up were documented.Results All the 3D models and navigation templates were successfully designed and printed.Surgery succeeded in all the patients.Follow-ups ranged from 6 to 18 months,averaging 13.3 months.The bleeding ranged from 100 to 250 mL,averaging 162.4 mL;the operation duration ranged from 60 to 120 min,averaging 73.2 min;the intra-operative fluoroscopy frequency ranged from 13 to 31 times,averaging 17.4 times;the incision length ranged from 16 to 32 cm,averaging 21.1 cm.All the incisions healed by the first intention and all the fractures obtained osseous union after 90 to 120 d (average,102.3 d).No significant complications like neurovascular injury or pulmonary embolism happened.The weight-bearing exercise time ranged from 25 to 40 d,averaging 31.5 d.According to the Matta imaging scores,the reduction was rated as excellent in 12 cases and good in 4.Altogether 28 screws were inserted with a success rate of 100％.Compared with the preoperative simulated screwing,the actual screwing angle deviated postoperatively by 0.12° ± 0.32°,the X axis by 0.36 ± 1.24 mm,the Y axis by 0.36 ± 1.24 mm and the Z axis by 0.22 ± 1.26 mm,showing no statistically significant difference between the actual 3D deviations and the test value of 0 (P ＞ 0.05).Conclusion In the treatment of unstable pelvic fractures,3D printing technique can be used in preoperative preparation of the connecting rod in the front ring nail-rod system to assist the sacroiliac screwing,significantly shortening the operation duration,reducing bleeding,ensuring safe and accurate screwing,and facilitating functional recovery.

Fatal Leptospirosis and Escherichia coli co-infection in a post-partum woman

@#The occurrence of Leptospirosis and Escherichia coli coinfection in the post-partum period is a novel case. This report illustrated a previously well woman from a suburban area presented with acute neurological deterioration following a two days history of fever during her puerperal period. Early interventions with fluids, broad spectrum antibiotics and intensive supportive care were given. Despite that, she deteriorated rapidly and developed pulmonary hemorrhage, disseminated intravascular coagulopathy, and multi-organ failure. She succumbed within 12 hours of admission. The knowledge about such fatal co-infections should be disseminated to medical practitioners encountering Leptospirosis infection and general public.

Photoelectric navigation-aided percutaneous pedicle screw placement versus traditional open posterior pedicle screw fixation for thoracolumbar fractures / 中国组织工程研究

BACKGROUND:Photoelectric navigation-aided percutaneous pedicle screw placement has been developed extensively,but its accuracy,safety and effectiveness have not yet been confirmed by evidence-based medicine.OBJECTIVE:To compare the curative efficacy of photoelectric navigation-aided percutaneous pedicle screw placement and traditional open posterior pedicle screw fixation for thoracolumbar fractures.METHODS:Sixty patients with thoracolumbar fractures were equivalently randomized to treatment and control groups and then underwent photoelectric navigation-aided percutaneous pedicle screw placement and traditional open posterior pedicle screw fixation,respectively.The perioperative indexes,imaging indexes,function recovery and incidence of complications were compared between two groups.RESULTS AND CONCLUSION:(1) The Visual Analogue Scale scores,intraoperative blood loss,radiant times,and hospitalization time in the treatment group were significantly less than those in the control group (P ＜ 0.05).(2) The operation time did not differ significantly between two groups (P ＞ 0.05).(3) The postoperative sagittal Cobb angle,and percentage of anterior height in the vertebral body in the two groups were significantly improved compared with those before surgery (P ＜ 0.05),but all above imaging indexes showed no significant differences between two groups (P ＞ 0.05).The endplate-screw angle in the treatment group was significantly less than that in the control group (P ＜ 0.05).(5) The excellent and good rate of placement in the treatment group was significantly higher than that in the control group (P ＜ 0.05).(6) These results suggest that compared with the traditional open posterior pedicle screw fixation,the photoelectric navigation-aided percutaneous pedicle screw placement exhibits high placement accuracy,less radiant times,less trauma,less blood loss and rapid functional recovery.

A case series of dermatological emergencies – Erythroderma

Erythroderma can be life-threatening, primarily because of its metabolic burden and complications. It is mandatory to establish its etiopathology in order to facilitate precise and definitive management. This disorder may be the morphologic presentation of a variety of cutaneous and systemic diseases. Detailed history and thorough work-up is therefore essential. Management of erythroderma involves multi-disciplines with progress monitoring especially on signs and symptoms suggestive of acute skin failure induced complications. Early diagnosis and referral of erythroderma to centres with dermatological services is crucial and will directly affect the outcome of the patients.

Decreased peripheral mitochondrial DNA copy number is associated with the risk of heart failure and long-term outcome / 中国病理生理杂志

AIM:Mitochondrial DNA (mtDNA) copy number variation (CNV), which reflects the oxidant-induced cell damage, has been observed in a wide range of human diseases .However, whether it correlates with heart failure , which is closely related to oxidative stress, has never been elucidated before .We aimed to systematically investigate the association between leukocyte mtDNA CNV and heart failure risk and prognosis .METHODS: A total of 1 700 hospitalized patients with heart failure and 1 700 age-and gender-matched community population were consecutively enrolled in this observational study , as well as 1 638 ( 96.4%) patients were fol-lowed prospectively for a median of 17 months (12~24 months).The relative mtDNA copy number in leukocyte of peripheral blood or cardiac tissue was measured in triplicate by quantitative real-time PCR method .RESULTS:Patients with heart failure possessed much lower relative mtDNA copy number compared with control subjects (P mtDNA copy number depletion is an independent risk factor for heart failure and predicted higher risk of cardiovascular deaths in patients with heart failure .

Common variants in IL-17A/IL-17RA axis contribute to predisposition to and progression of congestive heart failure / 中国病理生理杂志

AIM:Heart failure is characterized by immune activation leading to production and release of proinflammatory cytokines .Inter-leukin 17A (IL-17A) is a proinflammatory cytokine and multiple lines of evidence from animal and human studies suggest crucial roles of IL-17A in heart failure.Therefore, we investigated whether common polymorphisms of genes IL17A and IL17RA (coding interleukin 17 receptor A) gene contribute to genetic predisposition to heart failure and adverse clinical outcomes associated with it .METHODS AND RESULTS:A total of 1713 adults patients with congestive heart failure and 1713 age-and sex-matched controls were genotyped for promoter SNPs, rs2275913 and rs8193037 in IL17A and rs4819554 in IL17RA, to assess the relationship between individual SNPs and the risk of congestive heart failure .Results showed that rs8193037 in IL17A was associated with the risk of congestive heart failure (P<0.01) after adjustment for multiple cardiovascular risk factors including age , sex, smoking status, diabetes, hypertension and dyslipidemia.This association was evident in both ischemic and non-ischemic heart failure (P<0.05).Furthermore, prospective fol-low-up of 12.7 months for the occurrence of adverse clinical outcomes showed that rs 4819554 in IL17RA was significantly associated with cardiovascular mortality (P<0.05) after adjustments for multiple cardiovascular risk factors and New York Heart Association functional class.CONCLUSION:This study demonstrated associations of rs8193037 in the promoter of IL17A with the risk of conges-tive heart failure, and of rs4819554 in the promoter of IL17RA with the risk of cardiovascular mortality in patients with congestive heart failure.These data lend further support to the notion that immune activation and genetic polymorphisms contribute to heart failure path -ogenesis and progression .

Treatment for thoracolumbar spine infection without removing internal fixation / 中国组织工程研究

BACKGROUND:Surgical site infection of instrumented thoracolumbar spine is not rare and may induce serious consequences. There’s controversy about whether to remove the internal fixation in the treatment of infection. OBJECTIVE: To evaluate the safety of the treatment for surgical site infection of thoracolumbar spine without removing internal fixation. METHODS:A total of 358 patients underwent thoracolumbar internal fixation in Department of Orthopedics, the Fourth People’s Hospital of Zigong City, between March 2008 and December 2012. Among them, 13 cases appeared surgical site infection of instrumented thoracolumbar spine, including 5 males and 8 females. The average age of the 13 cases was 54.5 years (31-65 years). After patients were treated with aggressive debridement, irrigation and anti-infective therapy, the wound healings were evaluated. The hemanalysis, erythrocyte sedimentation rate, C-reactive protein and visual analogous scale score were analyzed and compared before debridement and 6 months after debridement. RESULTS AND CONCLUSION: The 13 patients had surgical site infection of instrumented thoracolumbar spine during 1 to 13 months post-operation. After timely diagnosis, aggressive debridement and irrigation, as wel as sensitive antibiotic therapy, 12 patients succeeded in curing infection and retaining implants. 1 patient with T12 fracture removed the fixation and cured infection. The folow-up time was 8-40 months, no case recurred. The hemanalysis, erythrocyte sedimentation rate, C-reactive protein and visual analogous scale score showed significant difference before debridement and 6 months after debridement (P < 0.05). Postoperative infection after thoracolumbar internal fixation should be timely diagnosis and receive surgical treatment. Through aggressive debridement, irrigation and sensitive antibiotic therapy, most patients can be cured without removing internal fixation.

Research progress of the natural small molecular products synergistically with antifungal agents to inhibit drug-resistant fungi / 药学学报

The incidence of systemic fungal infections have increased dramatically, moreover, drug resistance including either primary (intrinsic) or secondary (acquired) resistance, becomes one of the main reasons accounting for the failure of treating invasive fungal infections in the past decades. Nowadays, clinically available antifungal drugs are limited and their combination in antifungal therapy was not effective. It is expected to be a new strategy to synergistically sensitize antifungal drugs against drug-resistant fungi by using new small molecules. Based on the study in our research group and the reported work of others, we reviewed the research of the natural products which have synergistic effect with the antifungal agents against drug-resistant fungi. This review focused on the resource, structure, pharmacological activity, and action mechanism of the compounds, as well as somewhat in common, and would provide theoretical base for seeking new drug against drug-resistance fungi.

Derivatization of berberine based on its synergistic antifungal activity with fluconazole against fluconazole-resistant Candida albicans / 药学学报

Abstract: Our previous work revealed berberine can significantly enhance the susceptibility of fluconazole against fluconazole-resistant Candida albicans, which suggested that berberine has synergistic antifungal activity with fluconazole. Preliminary SAR of berberine needs to be studied for the possibility of investigating its target and SAR, improving its drug-likeness, and exploring new scaffold. In this work, 13-substitutited benzyl berberine derivatives and N-benzyl isoquinoline analogues were synthesized and characterized by 1H NMR and MS. Their synergetic activity with fluconazole against fluconazole-resistant Candida albicans was evaluated in vitro. The 13-substitutited benzyl berberine derivatives 1a-1e exhibited comparable activity to berberine, which suggested that the introduction of functional groups to C-13 can maintain its activity. The N-benzyl isoquinolines, which were designed as analogues of berberine with its D ring opened, exhibited lower activity than berberine. However, compound 2b, 2c, and 4b showed moderate activity, which indicated that berberine may be deconstructed to new scaffold with synergistic antifungal activity with fluconazole. The results of our research may be helpful to the SAR studies on its other biological activities.

Computer-assisted design of scaphoid reconstruction:individualized percutaneous cannulated screw fixation / 中国组织工程研究

BACKGROUND:Individualized percutaneous cannulated screws fixation with the help of computer-assisted design and cast immobilization are common methods for treating nondisplaced wrist scaphoid fracture. However their clinical outcomes are stil unclear. ＜br> OBJECTIVE:To compare the clinical results of individualized percutaneous cannulated screws fixation with the help of computer-assisted design and cast immobilization for treatment of Herbert type Ib scaphoid fracture. ＜br> METHODS:A total of 36 patients with fresh Herbert type Ib scaphoid fracture were divided into two groups, individualized percutaneous cannulated screws fixation with the help of computer-assisted design group (screw group, 20 cases) and cast immobilization group (cast group, 16 cases). In the screw group, cannulated screws were inserted using 0.8 mm kirschner wires from scaphoid tuberosity based on the preoperative individualization fixation parameters. The direction of the wires was guided under C-arms and Herbert screws were percutaneously immobilized after fluoroscopy. In the cast group, radial deviation and palmar flexion plaster casts were immobilized for 3 months. The time of bone union, rate of bone nonunion, time return to work, wrist motion were recorded and compared in the fol ow-up. ＜br> RESULTS AND CONCLUSION:Al cases were fol owed for 10-24 months. Al patients in the screw fixation group and 13 out of 16 patients in the cast group achieved bone union. The average time of bone union of the two groups was 6 weeks and 14 weeks respectively (P＜0.001). The time of returning to work was 7.6 weeks and 16.8 weeks respectively, with significant differences between the two groups (P＜0.001). The range of motion of screw fixation group at the final fol ow-up was 96.4°-114.4°, average 104.4°, which was significantly higher than that in the cast group (66.4°-104.2°, average 94.2°;P＜0.001). Individualized percutaneous cannulated screws fixation with the help of computer-assisted design can provide mini-invasion, high accuracy and good reproducibility, has better results than cast immobilization in the treatment of Herbert typeⅠscaphoid fractures.

Individualized localization of the lumbar pedicle screw entrance points by vertebral plate borderline / 中国矫形外科杂志

[Objective] To investigate the effectivity and reliability of individualized method to localize the entrance point of the lumbar pedicle screws by vertebral plate borderline.[Methods]Four vertebra specimen were taken the X-ray film of anterior-posterior views as the center of L2.On the X-ray film,the distance between the centre-point of the pedicle to the lateral and superior margins of the vertebral plate were measured,after applied barium at the centre-point of the pedicle,the specimen were taken the X-ray film once more,the relation of the barium to the centre-point of the pedicle was measured;the distance between the centre-point of the pedicle to the lateral and superior margins of the vertebral plate were measured on the normal lumbar X-ray film in 107 cases,the data in different sex and different projection 's center were compared;the method were applied to 40 patients of lumbar pedicle internal fixation,the information in hospital were reviewed to 30 patients of the lumbar pedicle screw localization by transverse process and transverse process.[Results]All(except L5)of lumbar plate borderline were displayed clear in the experiment,accurate rate of setpoint to be 92.5%.The principal X-ray affected scarely to the relation of the pedicle with the plate borderline of nearby two segment,but affected obviously far from three segment on the normal lumbar X-ray film;the accurate rate of one time 's setpoint in clinical application was 96%,average operation 's time being 96 minute,average lose blood being 212 ml,transverse articular process 's group showed significant difference.[Conclusion]Individualized localization of the lumbar pedicle screw entrance points by vertebral plate borderline is one of feasible method,displayed less trauma and accurate rate highly in the clinical application.

Percutaneous locking compression plate and interlocking intramedullary nail:a comparison in the treatment of distal tibia shaft fracture / 中国矫形外科杂志

[Objective]To evaluate the radiographic and clinical results of locking compression plate and interlocking intramedullary nail in the treatment of distal tibial shaft fracture(4 to 11cm proximal to tibiotalar joint).[Method]A total of 65 cases of distal tibia shaft fractures were retrospectively reviewed from 2003 to 2007.Thirty-seven cases were treated with locking compression plate as group A,and 28 cases were treated with interlocking intramedullary nail as group B.According to AO classification system,32 cases were type A,12 were type B,21 were type C.[Result]All cases were followed up for 12-24 months(mean,16.5 months).Five cases were found delayed or nonunion,with 1 case in group A and 4 cases in group B.One case in group A and 2 cases in group B were found developed deep infection.Two cases in group A and 8 cases in group B received second operation.The good-to-excellent rates of ankle joint function were 91.9% in group A and 71.4% in group B.The good-to-excellent rates of knee joint function were 97.3% in group A and 78.6% in group B.[Conclusion]Distal tibial shaft fracture could be treated successfully with either percutaneous plates or intramedullary nails.Percutaneous locking plate is better than intramedullary nail in aspect of prevention of delayed union,malunion and second operation.

Recent research progress on lumbar sagittal curvature / 中国矫形外科杂志

For the past few years,lumbar sagittal curvature is increasingly recognized as a critical parameter in spine surgery.It has become evident that good clinical outcome in the spine surgery requires proper lumbar sagittal curvature.With the development of recognization of lumbar sagittal curvature,many new ways and views have been found in measure and recovery sagittal alignments.The purpose of this manuscript is to provide a review of the past year's published literature involving lumbar sagittal curvature.

Radiographic study and clinical significance about sagittal plane curves in the adjacent segments of the thoracic and lumbar spine / 中国矫形外科杂志

[Objective]To study the anatomy about the sagittal plane curves of the adjacent segments of the thoracic and lumbar spine on the radiographs of standing position,in order to provide anatomical evidence for clinical operation. [Methods]Seventy-five standing posture radiographs about normal adult were obtained,the sagittal plane curves of the adjacent segments of the thoracic and lumbar spine were obtained by measuring the angles between perpendicular of adjacent superior end plate.The normal value and rule about sagiital plane curves were determined by statistical method.Fifty patients received operation according to these measures.The Cobb's angle of sagittal plane(T12-S1) at 0,3,12 months postoperatively,Denis scores at 12 months postoperatively and the cases in which breaking or loosening internal fixation occurred at 12 months postoperatively were recorded.[Results]The 95% confidence interval of about sagittal plane curves was obtained.There was no statistical significance for sex and age.It would improve function postoperatively and decrease the broken or loosened internal fixation.[Conclusion]It's important to recover the Cobb's angle in the short segmental internal fixation with pedicle screws through posterior approach.